欧美日韩国产一区二区三区地区,亚洲一区二区三区欧美,欧美成人ⅴideosxxxxx,亚洲国产一区二区三区

<br />
<b>Warning</b>:  Use of undefined constant wp_title - assumed 'wp_title' (this will throw an Error in a future version of PHP) in <b>/www/wwwroot/www.zionsfiction.com/wp-content/themes/onii/header-pc.php</b> on line <b>27</b><br />

其他CASE SHOW

170*170*20橡膠減震墊 工業設備橡膠減震墊

服務內容:170*170*20橡膠減震墊 工業設備橡膠減震墊

簡介:170*170*20橡膠減震墊 工業設備橡膠減震墊 Rubber damping pad for industrial equipment of 170*170*20 rubber cushion 上海淞江減震器集團有限公司官方網站為您介紹:170*170*20橡膠減震墊信息,工業設備......

170*170*20橡膠減震墊 工業設備橡膠減震墊
Rubber damping pad for industrial equipment of 170*170*20 rubber cushion

上海淞江減震器集團有限公司官方網站為您介紹:170*170*20橡膠減震墊信息,工業設備橡膠減震墊是一款最為普通的橡膠減震墊產品,沒有什么重量之分,平放在設備底部即可,是傳統的減震產品,效果一般。
Shanghai Songjiang absorber group limited official website for your introduction: 170*170*20 rubber shock pad, industrial equipment, rubber shock pad is a most common rubber shock pad products, not what weight, can be flat at the bottom of the device, is the product of traditional damping, the general effect.

170*170*20橡膠減震墊 工業設備橡膠減震墊
產品重要特點與用途
Characteristics and use of products
SD型工業設備橡膠減震墊以耐油橡膠為彈性材料經硫化模壓成型,其波浪狀表面可降低隔振墊垂向剛度,隔振墊基本塊尺寸為84x84x20(mm)該系列產品由一種規格尺寸,三種橡膠硬度隔振墊組成,承載范圍從0.2KN~6KN。為提高隔振效果,可多層隔振墊串聯使用,并各層之間以金屬薄板(3mm)隔開,n層串聯隔振墊總剛度為單層的1/n倍,考慮到垂向穩定性,串聯后隔振墊的總高度不應超過隔振墊的寬度,當被隔振體較輕時,可將隔振分割成1/2塊使用,分割后隔振墊承載能力及剛度也為原來的1/2倍,分割后的隔振墊也可再串聯使用。

The SD rubber ?shock absorber is manufactured by vulcanization using oil resistant rubber and stretch materials: whost surface can reduce the vertical rigidity.The basic dinension of the shock absorber cushion is 84x84x20(mm).The load range covers from 0.2~6KN.It needs no isolation walls.To improve shock absorption effect, multi-layer. isolation cushion should be used.Sepa-rate, layers can be separated by metal sheet(3mm). The total rigidity of n layers of cushion are 1/n that of a single layer.When the isolated object is relatively lighter, you can cut it into 2 pieces.The rigidity is 1/2 that of the original one. The separated isolating cushion can also be used in series.170*170*20橡膠減震墊 工業設備橡膠減震墊

SD型工業設備橡膠減震墊采用優質橡膠為材料,有圓形凹陷鏤空、剪切瓦楞形。一般以剪切形受力為主,具有固有頻率低、結構簡單、使用方便。為了提高減振效果可將減振墊適合二層、三層、四層串聯使用。適用于水泵、風機、壓縮機、冷水機組、柴油機組等機械設備消除減振。

SD type rubber shock pad is made of high quality rubber as the material, there is a circular depression, corrugated hollow shear. In general, shear force, has low natural frequency, simple structure, easy to use. In order to improve the damping effect of the damping pad for two layer, three layer, four layer series. Suitable for water pump, fan, compressor, chiller, diesel and other mechanical equipment of negative damping.170*170*20橡膠減震墊 工業設備橡膠減震墊

淞江集團生產的SD型工業設備橡膠減震墊產品是由優質的天然橡膠NR生產,彈性好,為工業廠房減震做出一定的貢獻。
The SD rubber cushion product produced by Songjiang group is produced by high quality natural rubber NR and has good elasticity and makes a certain contribution to the shock absorption of industrial plant.

170*170*20橡膠減震墊 工業設備橡膠減震墊

SD型工業設備橡膠減震墊的特點是既有高彈性,又有高黏性。橡膠的彈性是由其卷曲分子構象的變化產生的,橡膠分子間相互作用會妨礙分子鏈的運動,從而表現出黏性阻尼的.點,以致應力與應變往往處于不平衡狀態。
The characteristics of rubber cushions are both high elasticity and high viscosity. The elasticity of rubber is caused by the change of its conformational conformation. The interaction between rubber molecules will impede the movement of molecular chains, thus exhibiting the characteristics of viscous damping, so that stress and strain are often in an unbalanced state.

170*170*20橡膠減震墊 工業設備橡膠減震墊
170*170*20橡膠減震墊 工業設備橡膠減震墊
170*170*20橡膠減震墊 工業設備橡膠減震墊

了解該產品詳細參數請查看:【樣冊P85】SD型 橡膠減振墊

 

原創文章如轉載,請注明本文鏈接: http://www.zionsfiction.com/1431.html    瀏覽:5,889


最新推薦:
  • ·【蕪湖聚飛光電項目】橡膠接頭合同
  • ·【碧桂園生活水系統】橡膠接頭合同
  • ·【樣冊P51】SJNG型 耐油橡膠避震喉
  • ·【中石油天津大廈項目】采用上海淞江彈簧減震器
  • ·溴化鋰制冷機軟連接用哪種更靠譜?
  • ·中央空調風機盤管螺紋橡膠接頭安裝現場
  • ·【樣冊P23】NR天然橡膠撓性接頭原材料介紹
  • ·水泵安裝橡膠接頭時如何消除盲板力?
  • ·【中國地質勘探局-鉆井勘探船】橡膠接頭合同
  • ·【青島華潤中心悅府項目】波紋補償器合同
  • 主站蜘蛛池模板: 尉犁县| 灵山县| 临泉县| 武宁县| 漳州市| 娄底市| 咸阳市| 广元市| 巴南区| 孟州市| 乐至县| 沧州市| 波密县| 呼图壁县| 北票市| 成武县| 大悟县| 正安县| 临沧市| 乡城县| 天水市| 阿拉善盟| 新乐市| 山东省| 甘谷县| 鹤庆县| 黎川县| 丹凤县| 侯马市| 措勤县| 东源县| 庆安县| 桓仁| 潞城市| 都江堰市| 湾仔区| 泽库县| 晋中市| 象州县| 叶城县| 义乌市|